911 Carrera Coupe (996) F6-3.6L (2002)
4. Undo the fastening screw on the microswitch.
5. If the mount is at the front, shift the microswitch in direction -A-. If the mount is at the rear, shift the microswitch in direction -B-.
6. Position the fastening screw, open the sliding roof and close it again.
7. Check the position of the mount and the glass cover, adjust again if necessary.
8. Fastening screw: Tightening torque 3 Nm (2 ftlb.).
Electric Motor For Sliding Roof Sun Blind
Removing And Installing Electric Motor For Sliding Roof Sun Blind - Targa
Removing electric motor for sun blind