911 Carrera Coupe (996) F6-3.6L (2002)
12. Remove hydraulic pump. To do this, undo the fastening screws (M8) of the expansion tank -(upper two arrows)- and loosen the four screws -
lower arrows- (three M8 screws and one M6 screw) on the hydraulic pump.
13. Remove temperature sensor for engine-compartment fan.
14. Loosen three hexagon-head bolts on the air-conditioning compressor.
15. Remove air-conditioning compressor with the connected lines towards the rear and disconnect the electrical plug connection at the same time.
Place the air-conditioning compressor onto a padded surface.
16. Remove the hydraulic pump with the connected lines and set aside.