911 Carrera Coupe (996) F6-3.6L (2002)
10. Coat the coolant hose with water and fasten to the flange of the coolant pump. Engage coolant hose to the upper holder.
11. Coat the coolant hose with water and fasten to the flange for the coolant expansion tank. Observe the installation position of the hose clamp or
spring band clamp.
12. Fit coolant hoses over the coolant pump. Use water for easier mounting. Observe the position of the hoses. The markings on the coolant hoses
must be aligned with the lugs of the bracket. The part numbers must be legible from the right.
13. Fasten hose clamps. Observe the correct position. Fasten the hose clamps twisted slightly downwards.
NOTE: If incorrectly positioned, the generator bracket can make contact. This could lead to leaks.