911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-507004.png)
4.
Remove coolant regulator housing
Undo the three fastening screws on the coolant regulator housing. Remove the coolant regulator housing. Do not use the seal again.
5.
Remove coolant regulator
Remove coolant regulator with special tool 9627. Insert assembly aid between the sheetmetal edges as shown. Push the assembly aid against the
spring force until the retaining bracket is released. Then turn coolant regulator by approximately 90° and take coolant regulator out of the housing.
Installation overview of the coolant regulator - GT3
