911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-332006.png)
thrust bearing: 2A and pairing number on cylinder head/cylinder head cover.
9. Insert three thrust bearings and one bearing cover for the bearing sleeve of the camshafts with the guide rail for the control chain. Eight hexagon
socket bearing screws: position six M6 x 35 (Item 1) and two M6 x 40 (Item 2) screws for the camshaft bearings and the guide rail and tighten
slightly.
Position of the bearing screws: Item 1 = M6 x 35, Item 2 = M6 x 40
-
Adjusting Timing, Side 4 -6
1. Align camshafts, On both camshafts, the smaller circular cut-outs must lie at the top -arrows-.
