911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-332017.png)
9. Remove special tool adjustment gauge No. 9686. Unscrew the M8 auxiliary screw and pull off the gauge.
Second stage: final tightening of central screw: 110 degree torque angle with torque angle wrench.
10. Replace the three seals for the spark-plug recesses.
11. Install the cylinder head cover.
12. Fit both holders (A and B) and two new covers for the magnetic hydraulic valves for Vario-Cam Plus. Push two new covers (identical parts)
over the valves and position and tighten two holders with two M6 x 20 hexagon socket head bolts each.
-
A: Holder for camshaft adjustment valve
-
B: Holder for valve lift adjustment valve
Cover for magnetic hydraulic valves in installation position with integrated seal
