911 Carrera Coupe (996) F6-3.6L (2002)
Figure d3: recommended 1/4 inch tool for the front compressor screw
e. Lay the air-conditioning compressor with the leads connected to one side on a protective support. Also secure against falling down (tie wraps).
3. Turn the engine at the hexagon-head bolt (a/f 24) of the crankshaft belt pulley clockwise to TDC and then fix it with special tool fixing pins No.
9595/1 (use short fixing pin).
4. Remove holder for air-conditioning compressor. To do so, undo the two M8 hexagon-head bolts and remove the holder.
NOTE: After removal of the chain tensioner, the crankshaft must not be turned under any circumstances, because otherwise the timing chain may
jump over.
5. Remove the chain tensioner, cylinder bank 4-6 -arrow-. To do so, release and unscrew the chain tensioner with a socket wrench insert, hexagon