porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Bracket For Oil Cooler - GT3|Page 1818 > < Bracket For Oil Cooler - GT3|Page 1816
Page 2
background image

7. In vehicles with air conditioning, the additional assembly operations must be performed:

Suck Pentosin fluid out of the reservoir until the level is just below the joint.
7.1 Turn bayonet lock in the direction indicated by the arrow and pull off the reservoir. Immediately seal the lower reservoir with a suitable plug

(30 mm [diameter]).

Bayonet lock open

7.2 Disconnect battery positive at B+ disconnection point. Undo the hexagon nuts and set the box aside.

Bracket For Oil Cooler - GT3|Page 1818 > < Bracket For Oil Cooler - GT3|Page 1816