porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Bracket For Oil Cooler - GT3|Page 1820 > < Bracket For Oil Cooler - GT3|Page 1818
Page 4
background image

4. Install air-conditioning compressor. Before installation, check whether the spacer sleeve is fitted or present at the rear fastening point. Grease

sleeve before fitting if necessary.

5. Fit B+ box.
6. Remove plugs and install reservoir for power steering system.

6.1 Turn adjusting ring counterclockwise to its original position.

6.2 Push reservoir downward and turn adjusting ring clockwise until the marks line up.
6.3 Fill in Pentosin. Observe the specification for bleeding. 

Bracket For Oil Cooler - GT3|Page 1820 > < Bracket For Oil Cooler - GT3|Page 1818