911 Carrera Coupe (996) F6-3.6L (2002)
2. Connect and screw in (bayonet lock) the electrical plug connection for the gas discharge lamp until it engages.
3. To ensure that the function of the headlight beam adjustment is not impaired, the cable -C- of the plug must always point towards the exterior of
the vehicle.
4. Put the cap -1- of the headlight in position and press down until both releases -B- engage. Screw in both screws -A-. Tightening torque: 4 Nm (3
ftlb.).
5. Install main headlight and perform a function test.