911 Carrera Coupe (996) F6-3.6L (2002)
3. Fasten coolant hose -A- and coolant hose -B- to the cylinder bank 1-3 between the oil cooler bracket and coolant guide housing. Insert new sealing
ring -C-.
4. Mount the left coolant flange to cylinder bank 1-3.
5. Mount the spring band clamp and electrical connection plug to the coolant temperature sensor.
WARNING:
Swapped locking clips on the right coolant hose lead to coolant loss and consequently to engine damage.
In order to prevent the locking clips from being swapped, refit the engine-side locking clip immediately after removing the coolant hose.