911 Carrera Coupe (996) F6-3.6L (2002)
Air Filter Element: Service and Repair
GT3
Maintenance - GT3
Air filter - GT3
Replacing the filter element
1. Remove the complete air cleaner assembly.
Undo hexagon-head bolt M6 x 34. Undo the hose clamp on the throttle body. Pull off plug from hot film mass air flow sensor and completely
remove air cleaner assembly.
2. Undo captive fastening screws (9 ea.), remove air cleaner cover and take out air filter insert.
3. Clean air cleaner housing and air cleaner cover.
4. Insert new air filter insert.
5. Tighten captive fastening screws.
6. Push the cleaner housing into the throttle body. Tighten the hose clamp. Attach connector onto mass air flow meter. Tighten hexagon-head bolt
M6 x 34.