911 Carrera Coupe (996) F6-3.6L (2002)
fitting -5- tight. Position the cover -1- on the fastening screw -2-.
-
Use the foam part -4- for the Club Sport version.
-
For the Cup racing version, mount the bushing -6- instead of the foam part.
Tightening torque: 50 Nm (37 ftlb.)
4. Loop technique for fastening the seat belt to the bucket seat cross member
1. Loop the belt strap in the direction of the arrow -inset- around the transverse strut on the roll cage into the adjustable slider. The projection
-dimension = X- of the belt strap must be at least 100 mm.
2. Roll up the projecting belt strap and bind it with a tie wrap -1-.