911 Carrera Coupe (996) F6-3.6L (2002)
In connection with this, observe the note on fitting the diagonal control arm on the control arm.
Camber fine adjustment
The camber (the fine adjustment) is adjusted by moving the spring strut transversely (as for 911 Carrera 996). For this purpose, loosen the three
fastening nuts on the spring-strut mount and, to move the spring strut, remove the covering cap on the piston rod.
Instructions for fitting diagonal control arm on control arm - GT3
In the case of the road version of the GT3 (M002 and M003), the diagonal control arm must be fitted at the center bore (No. 1) of the control arm.
Left control arm (A)