911 Carrera Coupe (996) F6-3.6L (2002)
NOTE: The mounts for the right and left sides are identical parts.
-
The spring strut mount is positioned correctly if one of the 3 fastening pins is aligned with the stabilizer mounting saddle.
-
Once the mount has been positioned correctly, tighten the fastening nut to 60 Nm (44 ftlb.).
When tightening the fastening nut, hold at the piston rod using a 7 mm open-ended wrench.
NOTE: Never use an impact bolter to tighten the fastening nut.