911 Carrera Coupe (996) F6-3.6L (2002)
/f6-3.6l/Page-894005.png)
1. Unscrew fastening screw for halfshaft flange and pull out halfshaft flange.
2. Lever out sealing ring using a suitable tool.
Installation
1. Fill the space between the dust and sealing lips with grease (e.g. Liqui - Moly) and drive in the sealing ring up to the mounting face using special
tool 9252.
2. Tighten the fastening screw for the halfshaft flange with 44 Nm (33 ft. lbs.).
Sealing Ring For Input Shaft - GT3
Removing and installing sealing ring for input shaft - GT3
