911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-695002.png)
NOTE: To fit the door handle correctly, the return spring must be hooked into place prior to installation.
1. Position door handle -2- on door trim panel and secure with fastening screws -1-.
Tightening torque - Final tightening: 2 Nm (ftlb.) (1.5) + 0.2 Nm (ftlb.) (+0.1)
NOTE: Pull the door handle carefully to check that the return spring is fixed correctly.
Subsequent work
1. Install door trim panel.
