911 Carrera S Cabriolet (997) F6-3.8L (2007)
3. Unscrew the three fastening screws -1-.
4. Pull the power window motor out of the teeth.
Installing power window motor
1. Position power window motor and push into the teeth.
2. Screw in the three fastening screws. Tightening torque: 2 ftlb.
3. Press in electric connector on power window motor until it is felt to engage.
NOTE: The end positions of the power windows are deleted from the control unit when the electric connectors are disconnected and connected.
4. Operate rocker switch and fully close window once.