911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-719002.png)
2. Remove the hinge -2-.
Installing rear lid hinge
1. Roughly align the hinge -2- according to the old attachment points.
2. Screw in fastening screws (body side) M6 x 16 -1- and tighten: 7.1 ftlb.
Subsequent work
NOTE: Only on the Coupe
1. Install rear centre panel.
2. Engage rear pneumatic spring at the lid.
3. Install rear lid.