porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Body and Frame|Fender > < Removing and Installing Cover For Centre Underbody|Page 4248
Page 2
background image

NOTE:  When sliding in the underbody trim panel, make sure the overlap is correct.

1. Insert cover for front underbody -1-.

2. Tighten fastening screws -2-.

Tightening torque: 1.5 ftlb.

3. Tighten fastening nuts -3-.

Tightening torque: 0.5 ftlb.

Subsequent work

Lower the vehicle.

Body and Frame|Fender > < Removing and Installing Cover For Centre Underbody|Page 4248