porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Scuff Plate|Service and Repair > < Body - Carbon Fiber Composite Sill Guard Retrofit|Page 4432
Page 12
background image

9.1

Secure fastening screws => Figure 24 -2- and locating peg => Figure 24 -1- on the support (wiring duct) and fit carpet lining.

9.2

Install front side section trim, => Workshop Manual 702419 Removing and installing front side section trim section on "Installing".

9.3

Install inner door sill trim => Workshop Manual 680519 Removing and installing inner door sill trim section on "Installing".

9.4

Install bass loudspeaker, => Workshop Manual 914119 Removing and installing front loudspeakers (door) section on "Installing".

9.5

Position door trim panel, connect plug connection from wire harnesses (=> Figure 2 -C- and -E-) and wrap foam strips (-=> Figure 2 -F-)
around it => Figure 25 -A-.

9.6

Secure door trim panel. => Workshop Manual 705919 Removing and installing door trim panel section on "Installing".

9.7

Carry out function test.

9.7.1 Close both doors and then open them again. 

9.7.2 Both sill covers must light up for approx. 10 minutes.

Scuff Plate|Service and Repair > < Body - Carbon Fiber Composite Sill Guard Retrofit|Page 4432