911 Carrera S Cabriolet (997) F6-3.8L (2007)
3. Connect plug connection for interior mirror -1- (-Arrows a-) and clip it into the holder -Arrow A-.
4. Position mounting saddle -3- on the front roof trim panel -Arrow A- and secure with the fastening screw -2-. Tightening torque: 2.5 Nm (2.0
ftlb.)
5. Press in cap -1- (-Arrow B-).
6. Place convertible-top peg mount -2- on the windscreen frame from below -Arrow-, position it correctly and screw down hand-tight with the
fastening screws -1-.
NOTE: To prevent rattling noises, the two convertible-top peg mounts (left and right) must be facing outwards with respect to the centring pins fitted on
the convertible top or hardtop when tightening the screws.