911 Carrera S Cabriolet (997) F6-3.8L (2007)
3.1. Position tension strap -1- at the holes provided on the corner bow -2- and use blind rivets -3- (included in parts scope for convertible top
covering) to rivet on the tension strap -1-.
4. Fit tension strap and bracing strap on the tension bow.
4.1. Position the bracing strap -1- as shown. Position tension strap -2- and bracing strap -1- at the holes provided on the tension bow -3- and use
blind rivets -4- (included in parts scope for convertible top covering) to rivet on the tension strap -2-.
Installing plastic panel
1. Install plastic panel.
1.1. Insert fixing clip -1- onto plate of plastic panel from behind -2- and turn 90° clockwise.
1.2. Position plastic panel -2- on roof frame 1 -3- and screw down with the fastening screws -4-. Tightening torque Tightening torque : 5 Nm
(3.5 ftlb.)
Installing styling frame
1. Install styling frame on roof frame 3.