911 Carrera S Cabriolet (997) F6-3.8L (2007)
1. Move rubber holder -1- in -direction of arrow A- from the support for hydraulic pump -4-.
2. Unscrew fastening nuts -2- and take out hydraulic pump -3- from the support for hydraulic pump upwards -arrow B-.
NOTE: Before unscrewing the banjo bolts,Lay a cloth underneath to collect emerging hydraulic oil.
3. Unscrew banjo bolts -2A, 2B- on the hydraulic pump -1- and take out hydraulic lines -A, B- with sealing rings -3, 4-.
4. Unscrew silent mount -5-.
Installing hydraulic cylinder