911 Carrera S Cabriolet (997) F6-3.8L (2007)
Engine coolant level sensor
2.1.
Guide the sensor -2- into the reservoir and turn it 90° clockwise (bayonet lock).
2.2.
Connect cable plug.
3. Connect and install coolant hoses.
3.1.
Connect coolant hose for thermostat housing.
Coolant hose for thermostat housing
Push on coolant hose -1- and fit the spring band clamp.
3.2.
Connect coolant hose on the reservoir.
Coolant hoses on reservoir
3.2.1.
Fit and secure the coolant hose -6- and clip it into the bracket.
3.3.
Connect the coolant bleeder hose on the reservoir.
3.3.1.
Connect the coolant bleeder hose -2- and fit the spring band clamp -1- on the coolant bleeder hose -2-.
3.4.
Install supply hose (reservoir to engine) -3-.
3.4.1.
Connect the coolant hose -3- to the coolant pipe and secure with the spring clamps on the Henn couplings -5-.
The Henn coupling must lock with an audible click.
3.4.2.
Push on coolant hose -3- on the thermostat housing and tighten the spring band clamp -4-.
4. Connect fuel lines.