911 Carrera S Cabriolet (997) F6-3.8L (2007)
Coolant regulator housing
Replacing inner sealing ring for coolant regulator
Information
Before installing the coolant regulator, check the inner sealing ring for signs of damage/wear and replace it if necessary.
1. Carefully clamp the coolant regulator housing -1- in a vice at the clamping points provided -arrows-.
Sealing ring on coolant guide
2. Slide hammer kit Nr.168 -2- with attachment -3- must be fitted at a number of points -arrows- on the sealing ring -1-.
Pulling off sealing ring