911 Carrera S Cabriolet (997) F6-3.8L (2007)
Tool 9764 at stop ahead of position C
6.3.
Hold the tool firmly at the pipe -2- and press it slightly against the piston. Slowly turn the hexagonal handle -1- using spring force until the
cheese head bolt is at position C. The circlip engages in the tool with an audible click.
Tool 9764 at position C
6.4.
Slowly pull the tool and circlip -1- out of the crankcase. Dispose of old circlips.
Pulling tool 9764 out of the crankcase
To remove a piston pin:
Disassembly tool 9777