911 Carrera S Cabriolet (997) F6-3.8L (2007)
Removing piston pin
7.3.
To loosen the piston pin, turn the rear hexagonal handle -2- clockwise until the pin can be removed.
Loosening tool 9777 on piston pin
To remove pistons:
8. Assembly aid 9783 must be inserted into the cylinder bore from the oil pan side. Then press out the piston (by tapping lightly on the handle with
the ball of your hand).
8.1.
Assign the correct piston pin to the piston immediately.
8.2.
Fit assembly aid 9795 -1- (rubber sleeve) on the connecting rod to protect the cylinder liner.
Protective sleeves 9795 for connecting rods 1-3
9. Turn the crankshaft to the bottom dead center position U 2/5 marking at the vibration damper and lock at this position using a locating pin (tool
9595/1) -1-.