911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-200012.png)
Holding bridge 9779 for crankshaft
3. Mark pistons in installation position using a water-resistant marker.
Marking pistons 4-6
4. Screw in three fastening screws -2- for the vibration damper at the crankshaft flange.
4.1.
Turn the crankshaft using special tool turning device 9773 -1- so that the connecting rod bolts can be reached.
Turning the crankshaft (without vibration damper)
5. Remove pistons and connecting rods -1- on cylinder bank 4-6.
1 - Connecting rods
2 - Connecting rod bolts
