911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-200017.png)
Piston/connecting rod in retaining device 9778
Warning
Preloaded or pressurized components
^
Risk of eye injuries
^
Risk of bruising
-
Wear personal protective gear.
-
Secure components to prevent them from falling off suddenly.
4. First, fit the piston-pin circlip, which must be facing the flywheel side later.
4.1.
Fit the circlip on the side of the piston that does not have an assembly groove for the assembly tool 9776.
4.2.
Fit the circlip -1- at the position shown. A small screwdriver can be used to do this.
4.3.
Press the circlip in with your thumbs and guide it to its final position with the screwdriver.
Circlip facing flywheel side - hook at 12 o'clock position (engine in vertical position)
