911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-201002.png)
Pressing circlip into installation position
5.5.
Pull back and hold push bar in tool. Place the pipe -1- on a hard surface. Slowly guide the push bar down and press the circlip into installation
position. You should hear a distinct click.
6. Assembly tool 9776 must be positioned on the piston in such a way that the small hook is lying in the half-moon-shaped bore -arrow-.
Tool 9776 at assembly groove on piston
The piston would see the ring -1- in the position shown in the tool -2-.
Circlip position viewed from the piston (towards belt side)
