911 Carrera S Cabriolet (997) F6-3.8L (2007)
Turning the crankshaft (without vibration damper)
Information
^
The parting surface between the connecting rod and connecting rod cap is broken during the manufacturing process.
^
Assign connecting rod cap to the relevant connecting rod immediately after removal.
^
Also check the four-digit matching number.
^
Replace connecting rod bolts.
^
Replace connecting rod bearings.
3. Check that the new con-rod bearing shells are seated correctly (check locking lugs).
Locking lugs for connecting rod bearings
3.1.
Check allocation of connecting rod to connecting rod cap (matching number -1- and data matrix code).
Connecting rod on crankshaft
4. Install piston and connecting rod.
4.1.
For re-installation, fit the relevant piston into the related cylinder bore according to the inscription -4, 5, 6-.