911 Carrera S Cabriolet (997) F6-3.8L (2007)
Connecting rod cap on cylinder bank 1.3
5.1.
The matching number -1- and data matrix code are facing the exhaust side.
Connecting rod on crankshaft
6. Tighten all connecting rod caps -2- according to specifications.
-
Initial tightening: 20 Nm (15 ftlb.)
Connecting rod cap screws
-
Final tightening - torque angle: 80°
7. Fit rubber sleeves on connecting rods 1.3 to protect the cylinder lining ( assembly aid 9795 ).
8. Remove vibration damper in order to install the crankcase half.
Installing pistons - cylinder bank 1-3
Warning
Preloaded or pressurized components
^
Risk of eye injuries
^
Risk of bruising
-
Wear personal protective gear.