911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-214003.png)
3.1.
Example: Display for maximum oil level.
Oil level indicator (example of Max display)
Information
^
If the oil level drops below the Minimum marking, the segment below starts flashing!
^
The difference between the Min and Max markings is approx. 1.2 liters, i.e. one segment of the display corresponds to approx. 0.4 liters of oil.
^
Never top off engine oil above the Max marking.
4. The minimum oil level is reached when only the lowest segment on the oil level indicator is filled and flashing. Oil must be added immediately.
Display for oil level below Min marking
Checking engine-oil level using the PIWIS Tester
Notice
Incorrect oil level
^
Risk of damage to engine or catalytic converter
-
Check the oil level regularly.
-
The oil level must not fall below the Minimum marking or rise above the Maximum marking.
-
Only use approved engine oils.
Information
^
The engine-oil level can be checked on the instrument cluster display and using the PIWIS Tester 9718.
^
Any malfunctions in the oil level indicator show up as a warning in the instrument cluster.
^
Use the Info function to display the requirements for oil level measurement.
Test procedure with engine cold, oil temperature approx. 20° Celsius:
1. Connect a battery charger.
2. PIWIS Tester 9718 must be connected in the passenger compartment.
2.1.
Switch on ignition.
3. Switch on the Tester, select the relevant vehicle and then select Instrument cluster under Control unit search.
