911 Carrera S Cabriolet (997) F6-3.8L (2007)
2. Clip the servo motor actuating lever onto the deflection lever of the heater/air-conditioning unit.
3. Lay electric line to the servo motor -A- and connect the electric connector to servo motor until it is felt to engage.
4. Secure servo motor with the fastening screw -1-. - Tightening torque: 1.2 Nm (1.0 ftlb.) ±0.5 Nm ( ± 0.5 ftlb.)
5. Switch on ignition and check function of servo motor by adjusting the air conditioning control.
Subsequent work
Subsequent work for fresh/recirc. air servo motor
1. Install heating/air-conditioning unit.