911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-886002.png)
2. Slide servo motor vertically downwards and remove.
3. Disconnect electrical plug connection from servo motor and remove the servo motor.
Installing servo motor for headlight levelling system
INFORMATION: After reinstallation or installation of a new servo motor for the headlight levelling system, the headlight must be calibrated.
1. Push electric plug onto the servo motor until it is felt to engage.
2. Engage servo motor in the actuator for the main headlight and push servo motor upwards.
