911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-179002.png)
Information
Information
The wheel bearings adopt the function of the former ABS pulse rings. They are fitted with a so-called multipole seal. This is a seal with a magnetized
layer, which generates the torque impulses for the ABS rpm sensors.
The multipole seal must not come into contact with highly magnetic parts. During installation, make sure that the magnetic side is facing the ABS
sensor. Use test card 147-2 for this.
Preliminary work
1. Remove rear wheel bearing housing (wheel carrier).
2. Remove brake disc, parking-brake shoes, brake cover plate and speed sensor on wheel bearing housing (wheel carrier).
Removing rear wheel bearing
1. Press out wheel hub.
