911 Carrera S Cabriolet (997) F6-3.8L (2007)
Push on connectors for stage 1 and stage 2 of passenger's airbag unit until they engage securely.
8.2. Connector for seat-belt pretensioner, left -7- and right -8-.
Push on connector for the seat-belt pretensioner until it engages securely.
Fit rubber sleeve -9-.
9. Route the new wire harness along the main wire harness, guide it through existing cable ducts and tie it to the main wire harness using tie-wraps.
INFORMATION: Allocation of lines - see wiring diagram.
10. Plug new line into the contact strip until the contact engages securely.
11. Push connector guide onto the connector until it engages securely.
12. Push connector housing onto the connector
12.1. Before fitting the connector housing, check for signs of damage, and replace if necessary.