911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-509017.png)
18. Push on connector of new wire harness for head airbag at the left -5- and right -6- until it is felt to engage.
INFORMATION: Allocation of lines - see wiring diagram.
19. Push new lines into the contact strip until the contacts are felt to engage.
20. Push connector guide onto the contact strip until it is felt to engage.
21. Slide connector into the connector housing -Arrow A-.
22. Insert locking mechanism into the connector housing and press in -Arrow B- until it is felt to engage.
