911 Carrera S Cabriolet (997) F6-3.8L (2007)
Subsequent work
Subsequent work for front wiring harness
Installing front apron.
Removing Main Wire Harness
Removing And Installing Main Wire Harness
Tools
Technical values
Preliminary work
1. Remove battery.
2. Remove plenum panel cover.
3. Remove CD changer.
4. Remove navigation unit with retaining bracket.
5. Remove loudspeaker amplifier.
6. Remove luggage compartment trim panels
7. Remove front-end control unit.
8. Remove front wheel housing liner on left and right.
9. Remove front cover.
10. Remove tank for windscreen washer system.
11. Remove dashboard.
12. Remove heating/fresh-air unit.
13. Remove front seat at left and right.
14. Remove left and right scuff plate.