911 Carrera S Cabriolet (997) F6-3.8L (2007)
32. Unclip wire harness on end plate under windscreen at the two retaining clips -arrow-.
33. Remove grommets -41- in centre, and on left and right.
34. Pull through main wire harness in direction of interior.
Exposing main wire harness in passenger compartment
1. Loosen seat belt mount at left and right.
1.1. Press off cap -1- with a screwdriver and unscrew the fastening screw -2-. Remove seat belt with fitting -3- and spacer sleeve -4-.
2. Disengage floor covering at the support and lay it in the vehicle interior.
3. Remove left and right support.
3.1. Unlock locating peg -1- of the support using the commercially available removal tool Disassembly tool, universal NR.21.