911 Carrera S Cabriolet (997) F6-3.8L (2007)
2. Release both electrical connectors -A- and unplug them.
3. Take out the control unit.
Installing vehicle electrical system control unit
1. Press electrical plugs into control unit and lock them -arrow- so they are felt to engage.
2. Push vehicle electrical system control unit upwards into the holder. It must engage properly. Make sure the electrical leads are not pinched.
Subsequent work for vehicle electrical system control unit
Subsequent work - vehicle electrical system control unit
Attach relay carrier 1.
Coding vehicle electrical system control unit
Programming the vehicle electrical system control unit:
Reading out and printing out values
WARNING:
Sudden voltage interruption of the power supply to the control module.
-
Destruction of the control module.