911 Carrera S Cabriolet (997) F6-3.8L (2007)
Oil Pressure Sender: Service and Repair
Removing and installing oil-pressure sender
Preliminary work
1. Raise the vehicle.
2. Allow engine to cool down.
3. Place protective covers on the vehicle to avoid damaging the body and passenger compartment.
4. Remove rear underbody panelling.
5. Lower the engine.
5.1.
Support the engine at the oil pan using hydraulic garage jack H 2 SL WE 1032 and transmission jack plate of transmission jack V.A.G. 1383 A
WE 1082.
5.2.
Unscrew two special M12 nuts (internal Torx(R), screw insert T55) -1- on the engine mounting (hydraulic mount) at the left and right.