911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-95001.png)
Impact Sensor: Service and Repair
695119 Removing And Installing Airbag Sensor
Preliminary work
Preliminary work for front airbag sensor
1. Disconnect battery.
2. Remove front apron.
Preliminary work for centre airbag sensor
1. Disconnect battery.
2. Remove front seat.
3. Remove the rear side-panel lining.
4. Remove sill.
5. Undo screw fastening seat belt to the body.
General warning notes
Safety instructions for airbag sensor
CAUTION: Incorrect triggering of airbag modules.
-
Danger of injury and material damage if airbag sensors are not handled correctly.
