911 Carrera S Cabriolet (997) F6-3.8L (2007)
/f6-3.8l/Page-475038.png)
1. Fasten main wire harness at centre dashboard bracket.
1.1. Lay main wire harness and fasten with four new tie-wraps.
2. Fasten main wire harness at right dashboard bracket.
2.1. Clip in main wire harness on both cable guides.
3. Fasten main wire harness at left dashboard bracket.
3.1. Clip in main wire harness on cable guide.
3.2. Insert fastening screw and tighten fastening nut. - Tightening torque: 3.5 Nm (2.5 ftlb.)
