911 Carrera S Cabriolet (997) F6-3.8L (2007)
Installing rear window lifter
1. Connect electric plug connection -1- to window regulator motor -2- (-arrow A-) and lock the latch -3- (-arrow B-).
2. Guide window lifter -4- into the window shaft from above -arrow C- and position in the mounts in the inner side section.
3. Remove spacing block -1- between B-pillar and convertible top support -2- (-arrow A-). Position convertible top support -2- (-arrow B-). Position
and tighten fastening screws -3- and fastening nuts -4- in convertible-top support -2-. Tightening torque: 23 Nm (17 ftlb.)
4. Insert the deflection fitting -5- into the belt guide section -arrow C-. Screw in and tighten fastening screws -6-. Tightening torque: 50 Nm (37
ftlb.)
Installing hydraulic cylinder