911 Carrera Targa F6-3164cc 3.2L (1985)
Harmonic Balancer - Crankshaft Pulley: Technical Service Bulletins
Crankshaft Pulley - Damage To Locating Pin Hole
Subject:
Torquing Of The Crankshaft Pulley
Model
911
Group
1
Part Identifier
1376
Number
8506
March 19, 1985
When removing the crankshaft pulley or loosening the crankshaft pulley bolt, it is possible that the hole for the locating pin in the pulley may get
damaged. Reinstallation of the damaged part with an elongated hole could cause the valve/ ignition timing to be maladjusted. To avoid this, inspect
pulley for elongated hole. If damaged, replace.
A new pulley, part number 930.102.024.03, has been introduced with two bores. A pulley holder, tool number 9236, is available to aid in easier removal
and preventing the possibility of damage.
Introduction Date:
December 1984
Engine Number:
64F01513