911 Carrera Targa F6-3164cc 3.2L (1985)
Fluid Pump: Service and Repair
NOTE: Because of the ability to interchange Porsche transmissions, it is possible to find an oil pump equipped transmission in a later model.
Disassembly
-
Mark installed position of bearing sleeves for installation later.
-
Drive bearing sleeves out of side transmission cover from inside with a suitable mandrel.
A = Suitable base ring
-
Pull bearing sleeves out of oil pump cover with a suitable extractor (e. g. Kukko 12 - 14.5). To avoid damage on sealing surface it is necessary to
apply the support of the extractor.