911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
In the future, the fastening screws (arrow 3, Figure 6) will be changed from M5 to M6 threads.
Repair 3.2 Replace the left and right side bolts for the roof module on the windshield frame.
-
Remove the existing allen head bolts (arrow 1, Figure 6.1) one at a time and replace them with new bolts, part number 900 378 163 09
(microencapsulated) and torque to 12.5 +/- 0.5 Nm (9 +/- .36 Ft-lbs).
-
If a felt or plastic strip has been installed between the windshield frame and bracket (arrow 1, Figure 6.1) mark the position of the bracket to the
windshield frame using tape (arrow B, Figure 6.2) and remove all bolts at the same time. Before tightening the new bolts adjust the bracket to it's
original position and torque the bolts to 12.5 +/- 0.5 Nm (9 +/- .36 Ft-lbs).
Area # 4
Rattles or creaks in the area of the lower "B" pillar / roof, left and right.
Possible Cause:
-
The distance spacer (A in Figure 7) may be loose or incorrectly positioned.