911 Carrera Targa F6-3600cc 3.6L SOHC (1996)
-
If missing, install a new rubber stop using soapy water or Vaseline. Slide the thin side of the stop from the bottom into the hole using a screwdriver
(arrow C, Figure 9).
Caution:
Before installing the rubber stop, use tape on the glass roof to avoid scratches.
Repair 4.3: Lack of lubrication for the guide bushing on the rear axle plates.
-
Remove the rear axle plate (arrow, Figure 10) with the glass roof closed.
-
Lubricate the guide bushing of the axle plate with a stiff grease, part number 999 917 751 00.
-
Reinstall the axle plates and adjust the height of the glass roof to the roof trim pieces. Torque the axle plate screws to 5.5 + 0.5 Nm (4 Ft lbs).
Area # 5
Creaking noises from around the rear window.
Possible Cause:
-
The rear window mounting frame (2 in Figure 11) touches the rear glass.
Preparation:
-
Remove the rear wall panel.
